Table of Contents
Advertisement
LUNA2000-100KTL-M1 Smart Power Control System
User Manual
4.3 Pre-installation Checks
● After placing the equipment in the installation position, unpack it with care to
Checking the Outer Packing
Before unpacking the device, check the outer packing for damage, such as holes
and cracks, and check the device model. If any damage is found, or if the device
model is not what you requested, do not unpack the product and contact your
dealer as soon as possible.
Unpacking the Device
Step 1 Use diagonal pliers to cut the packing tape, and use a utility knife to slice the tape
along the gaps in the packaging. Take care not to damage the device inside.
Step 2 Open the packaging and check the deliverables.
----End
Checking Deliverables
After unpacking the device, check that the deliverables are intact and complete,
and check that the device is free from any obvious damage. If any items are
missing or damaged, contact your dealer.
4.4 Moving the Smart PCS
Precautions
Ensure that the lifting handles are installed to the correct screw holes. Do not
install them to the mounting bracket screw holes on the top. Incorrect installation
may cause device damage or personal injury.
Issue 07 (2023-07-15)
NO TICE
prevent scratches. Keep the equipment stable during unpacking.
NO TE
You are advised to install the device within 24 hours of removing the outer packing.
NO TE
For details about the number of accessories delivered with the device, see the
included in the packaging.
CA UTION
Copyright © Huawei Technologies Co., Ltd.
4 Installing the Smart PCS
Packing List
30
Advertisement
Table of Contents
