Table of Contents
Advertisement
LUNA2000-100KTL-M1 Smart Power Control System
User Manual
8.5 Replacing the Smart PCS
Context
The device enclosure is severely damaged or the device hardware is faulty due to
external forces.
Procedure
Step 1 Send a shutdown command on the SUN2000 app, SmartLogger, or management
system.
Step 2 Turn off the external switches on the DC and AC sides.
Step 3 Remove the DC power cables, AC power cables, communications cables, and PE
cable from the Smart PCS in sequence.
Step 4 Remove the Smart PCS.
Figure 8-18 Removing the Smart PCS
Step 5 Install the new Smart PCS.
Step 6 Connect the PE cable, DC power cables, AC power cables, and communications
cables in sequence. For details, see
Step 7 Power on the Smart PCS. Observe the LED indicators to check the running status
of the Smart PCS and verify that the replacement is successful.
----End
Follow-up Procedure
Step 1 Log in to the SmartLogger WebUI, choose Maintenance > Connect Device, select
the ESS, and click
Smart PCS and ensure that the DC side of the Smart PCS is powered on.
Issue 07 (2023-07-15)
to send a startup command. Observe LED indicators of the
Copyright © Huawei Technologies Co., Ltd.
5 Electrical
Connections.
8 Device Maintenance
67
Advertisement
Table of Contents
