Table of Contents
Advertisement
LUNA2000-200KTL-H1 Smart Power Control System
User Manual
8.5 Replacing the Smart PCS
Context
The device enclosure is severely damaged or the device hardware is faulty due to
external forces.
Procedure
Step 1 Send a shutdown command on the SUN2000 app, SmartLogger, or management
system.
Step 2 Turn off the external switches on the DC and AC sides.
Step 3 Remove the DC power cables, AC power cables, communications cables, and PE
cable from the Smart PCS in sequence.
Step 4 Remove the Smart PCS based on site requirements.
1.
2.
Issue 08 (2024-01-23)
Support-mounted or wall-mounted
Figure 8-18 Removing the Smart PCS
Installed on the DCBOX
Copyright © Huawei Technologies Co., Ltd.
8 Device Maintenance
77
Advertisement
Table of Contents
