Preparing Cables - Huawei LUNA2000-200KTL-H1 User Manual

LUNA2000-200KTL-H1 Smart Power Control System
User Manual

5.2 Preparing Cables

Table 5-1 Cable description (S indicates the conductor cross-sectional area of the AC cable, and S
indicates the conductor cross-sectional area of the PE cable)
Cable Type
DC power Two-core outdoor cable and
cable M12 OT/DT terminal
(multi-
core)
DC power Single-core outdoor cable and
cable M12 OT/DT terminal
(single-
core)
Single-core outdoor copper
[1]
PE cable
cable and M10 OT/DT terminal
Communic FE: CAT 5E outdoor shielded
ations network cable (internal
cable resistance ≤ 1 ohm/10 m) and
the shielded RJ45 connector
Issue 08 (2024-01-23)
NO TE
The cable colors shown in the electrical connection diagrams provided in this section are for
reference only. Select cables in accordance with local cable specifications (green-and-yellow
cables are only used for protective earthing). The factors that affect cable selection include
the rated current, cable type, routing mode, ambient temperature, and maximum expected
line loss.
Copyright © Huawei Technologies Co., Ltd.
Conductor Cross-
Sectional Area
2
70–185 mm
2
50–185 mm
S ≥ S/2
p
2
0.2 mm
5 Cable Connection
Outer Source
Diameter
30–60 mm Prepared
by the
customer
(In the
DCBOX
15–35 mm
scenario,
the DC
cables are
preinstalle
d on the
DCBOX
and do
not need
to be
prepared.)
- Prepared
by the
customer
4.5–7.5 mm ● 1.2 m,
● You can
p
delivere
d with
the
device
also
prepare
a cable
accordi
ng to
site
require
ments.
45