Powering Off The System - Huawei LUNA2000-200KTL-H1 User Manual

LUNA2000-200KTL-H1 Smart Power Control System
User Manual
After the cleaning is complete, reinstall the baffle plate to the air intake vent.
Tighten the screws with a torque of 1.2 N·m.
Removing the Protective Cover from the Air Exhaust Vent
Figure 8-2 Removing the protective cover
After the cleaning is complete, reinstall the protective cover to the air exhaust
vent. Tighten the screws with a torque of 1.2 N·m.

8.2 Powering Off the System

Precautions
To prevent personal injury and equipment damage, perform the following
procedure to power off the Smart PCS for troubleshooting or replacement.
● If the DC switch between the Smart PCS and the DC LV Panel busbar has been
● If the AC switch between the Smart PCS and the power grid has been turned
● Before power-off for maintenance, do not touch the energized components of
Procedure
Step 1 Wear proper PPE.
Issue 08 (2024-01-23)
NO TICE
NO TICE
CA UTION
turned off automatically, do not turn on the switch before the fault is rectified.
off automatically, do not turn it on before the fault is rectified.
the Smart PCS. Otherwise, electric shocks or arcs may occur.
Copyright © Huawei Technologies Co., Ltd.
8 Device Maintenance
71