C Resetting Password - Huawei LUNA2000-200KTL-H1 User Manual

LUNA2000-200KTL-H1 Smart Power Control System
User Manual
You are advised to reset the password in the morning or at night when the solar
irradiance is low.
Reset the password only when the AC power is supplied to the Smart PCS from
the power grid, diesel generator, or other voltage-source PCSs.
Step 1 Check that the AC and DC sides of the Smart PCS are both powered on, and
indicators
Step 2 Turn off the AC switch between the AC side of the Smart PCS and the power grid
to power off the AC side of the Smart PCS.
Step 3 Turn off the DC switch between the DC side of the Smart PCS and the ESS to
power off the DC side of the Smart PCS.
Step 4 After the Smart PCS is powered off, complete the following operations within 4
minutes:
1.
2.
3.
Step 5 Log in to the app and reset the password within 10 minutes. Otherwise, all
parameters of the Smart PCS remain unchanged.
----End
Issue 08 (2024-01-23)
NO TICE
and are steady green or blinking slowly for more than 3 minutes.
Turn on the AC switch and wait for about 90s or until the Smart PCS indicator
blinks.
Turn off the AC switch, and wait for about 30s or until all LED indicators on
the Smart PCS panel turn off.
Turn on the AC switch and wait for about 90s or until the Smart PCS indicator
blinks.
Copyright © Huawei Technologies Co., Ltd.
C
Resetting Password

C Resetting Password

93