Table of Contents
Advertisement
LUNA2000-200KTL-H1 Smart Power Control System
User Manual
Method
If the installation position is high and a crane is required, run a sling (strong
enough to bear the weight of the Smart PCS) through the two lifting eyes to hoist
the Smart PCS.
Table 4-2 Method description
Method
Manual
handling
Hoisting
Note [1]: The hoisting capability of the crane shall be greater than or equal to 3
t, the working radius shall be greater than or equal to 2 m, and the length of
the lifting sling shall be greater than or equal to 1.8 m. To prevent damage to
the device surfaces, you are advised not to use metal slings such as steel wire
ropes.
Hole Description
(1) Lifting handle screw hole
Procedure
Step 1 Take the device out of the packing case and move it to the specified position.
Figure 4-7 Using the lifting handles
Issue 08 (2024-01-23)
Tool
Lifting handles
[1]
Crane sling
Copyright © Huawei Technologies Co., Ltd.
(2) Mounting bracket screw holes
4 Installation
Description
Prepared by the
customer
Prepared by the
customer
36
Advertisement
Table of Contents
