Huawei LUNA2000-200KTL-H1 User Manual page 28

LUNA2000-200KTL-H1 Smart Power Control System
User Manual
No. Category
2 Running
indication
3 Communication
indication
4 Fault/
Maintenance
indication
●
Issue 08 (2024-01-23)
Status (Blinking Fast: On
for 0.2s and Off for 0.2s;
Blinking Slowly: On for 1s
and Off for 1s)
Blinking green slowly
Blinking red fast
Off
Steady green
Steady yellow
Blinking green slowly
Blinking red fast
Off
Blinking green fast
Off
Steady red
Blinking red fast
Blinking red slowly
Blinking green slowly
Off
If the Smart PCS is installed on the DC LV Panel (or the installation height is
about 2.4 m), you are advised to use the SmartLogger or app to check the
device running status. The optimal viewing range of the Smart PCS indicators
is 3 m to 5 m, and the viewing angle is less than or equal to 15°.
Copyright © Huawei Technologies Co., Ltd.
Meaning
The device is in standby or cable
connection detection state.
An environmental fault occurred on the
DC side.
The DC side is not properly connected,
or the auxiliary power supply inside the
device is not working.
The device is operating in grid-tied
mode.
The device is operating in off-grid mode.
The system environment is normal but
the device is not in the working state.
An environmental fault occurred on the
AC side.
The AC side is not connected to the
power grid.
The device receives data through
northbound FE communication.
The device has not received data
through northbound FE communication
in at least 10s.
A major alarm was generated on the
device.
A minor alarm was generated on the
device.
A warning was generated on the device.
The device is under local maintenance
or shut down after receiving a
command.
There is no alarm, and no local
maintenance operations are performed.
2 Product Description
21