Table of Contents
Advertisement
LUNA2000-100KTL-M1 Smart Power Control System
User Manual
Figure 2-12 Working modes
Table 2-4 Working mode description
Working
Mode
Standby
Operating
Shutdown
Issue 07 (2023-07-15)
Description
The Smart PCS enters Standby mode when the external
environment does not meet the operating requirements. In standby
mode:
● The Smart PCS continuously performs status check and enters
Operating mode once the operating requirements are met.
● The Smart PCS enters Shutdown mode upon receiving a
shutdown command or detecting a fault after startup.
In operating mode:
● The Smart PCS controls charge and discharge based on system
commands.
● The Smart PCS enters Shutdown mode after detecting a fault or
receiving a shutdown command.
● In Standby or Operating mode, the Smart PCS enters Shutdown
mode after detecting a fault or receiving a shutdown command.
● In Shutdown mode, the Smart PCS enters Standby mode when
a startup command is received and faults are rectified, the DC
power is insufficient, or the DC external switch is turned off.
Copyright © Huawei Technologies Co., Ltd.
2 Product Description
22
Advertisement
Table of Contents
