Touchpad - NEC Express5800 Series User Manual

4.6 Touchpad

Touchpad operating surface
Moving the pointer
Single click
Double click
Dragging
Scroll
Express5800 Series 17.3-inch LCD Console Drawer (1port) User's Guide
46
Left button
Slide a finger on the operating surface to move the pointer on the screen.
Tap once on the operating surface or click the left button once.
Tap twice on the operating surface or click the left button twice.
Tap twice on the operating surface. On the second tap, slide your finger on the operating
surface to desired position, then release the finger.
Or slide the finger on the operating surface to desired position while holding down the left
button, then release the finger.
Slide up or down a finger on the right edge of the operating surface to scroll the screen.
Im portant



Scroll
Scroll
Right button
Touchpad is designed to be operated by a single finger. The following
operations are not accepted:
– Operating with gloved finger
– Operating with pen, pencil or similar implement.
– Operating with m ultiple fingers
– Operating with some object other than finger put on the surface
Operating touchpad in the following conditions may fail. Operate after
fully dried.
– When the surface is wet.
– When dew condenses on the surface.
– When the finger is w et.
– When the finger is m oist with sweat.
Do not use sharp-pointed m etal such as a pen. Doing so causes crack
or m alfunction.
Scroll operating area
(17% of right edge)