Panasonic AJ-LT95 Operating Instructions Manual page 15

Parts and their functions
AUDIO control area
4 V1 audio playback level controls/V2 INT audio
recording level controls
These controls enable the playback audio level of
VTR1 to be adjusted for each channel.
They are also used to adjust the volume during
editing from VTR1 to VTR2.
Slide controls are used to make for fine and smooth
adjustments.
The position marked "0" denotes the reference
level.
(–20 dB for 525i mode; –18 dB for 625i mode)
POWER
AUDIO MONITOR SELECT
OFF ON
MIX 4 MIX 4
3 3
CH 1 CH 2 CH 3 CH 4 (V1·2)
UNI 2 2 V1 V2
V1/V2 MIX 1 MIX 1
ANALOG L R
REC
VAR
CH 1
UNI
CH 3 4
VAR
MIX 4 MIX
3 3
2 2
MIX 1
ANALOG ANALOG
SDI
INT
CH 1
5 V2 AUDIO input selector switches
Used to select the sound which is to be input to the
audio channels of VTR2.
O INT/SDI/ANALOG switch
INT: The VTR1 audio signals are input to VTR2
by the internal digital connections. Their
level can be adjusted by the level controls
4.
SDI: The SDI embedded audio signals, which
have been input to the SDI connector, are
supplied to VTR2.
adjusted by the level controls 6.
ANALOG:
The analog signals which have been input
are supplied to VTR2. Their level can be
adjusted by the level controls 3.
O Channel selector switches
The audio
INT/SDI/ANALOG switch are input to the VTR2
channels which are selected by these switches.
When mixing between 1 and 2, the mixed signals
of channel 1 and channel 2 are input; when
mixing between 3 and 4, the mixed signals of
channel 3 and channel 4 are input.
15
CH 2 CH 3 CH 4
V2
PB
SDI
REC
4 MIX 4 MIX 4
5
3 3
2 2
MIX 1 MIX 1 MIX 1
V2
INPUT
ANALOG ANALOG
SDI SDI SDI
INT INT INT
10 10 10
0 0 0
10 10 10
20 20 20
30 30 30
0 0 0 0 0 0
CH 2 CH 3 CH 4
V2 INT REC
/ V1 PB
4
Their level can be
signals selected by the