Connector Area - Panasonic AJ-LT95 Operating Instructions Manual

Parts and their functions
NOT USER
SERVICEABLE

Connector area

1 EDL connector (D-SUB 9P)
Connect a personal computer or other external unit
to this connector to upload and download the edit
data.
2 TC IN connector (BNC)
The external time code signal (LTC) is supplied to
this connector.
3 REF VIDEO IN connectors (BNC a2, loop-
through)
These are automatically terminated with a 75 Ω
resistance.
Supply standard analog composite signals to these
connectors. The unit's video output will be
synchronized with the input signals.
4 DC IN connector (XLR 4P)
This is the DC power input socket.
The AJ-B95, available as an optional accessory
must be used for the power supply.
No guarantees are made when the unit is operated
by any other power supply.
5 VIDEO/Y IN connector (BNC)
The analog composite signals or analog component
Y (luminance) signals are supplied to this
connector.
The signals are selected using setup menu item
No.670 (V IN SEL).
6 P /P IN connectors (BNC)
B R
The analog component P
supplied to these connectors.
1 5 6
VIDEO IN
VIDEO/Y
REMOTE
P B P R
EDL
V
T
VIDEO/Y
R
P B P R
2
VIDEO OUT
SDI
V
IN
2
A CH 1 CH 2
U
D
I
ACTIVE THROUGH
O
I
N
A CH 1 CH 2
(CH 1/3) (CH 2/4)
U
V
D
1 I
/ O
O
V
SDI
U
2
IOUT
(V2)
T
8 9
and P signals are
B R
7 5 6
VIDEO IN
VIDEO/Y
P B P R
VIDEO VIDEO/Y
P B P R
MON
OUT
TC
OUT
VIDEO OUT
L
CH 3 CH 4
(CH 1•3) (CH 2•4)
MIC
R
CH 3 CH 4
(CH 1/3) (CH 2/4)
(V1)
: 8 9
7 REMOTE connector (D-SUB 9P)
(525i mode only)
This remote connector complies with the RS-422A
standard. It enables the unit to be controlled using
an external controller.
The remote connector of VTR1 is switched to the
REMOTE OUT connector by setting the CONTROL
switch to "EXT VTR".
An externally connected VTR can then be
controlled using the unit's VTR1 operation system.
8 VIDEO/Y OUT connector (BNC)
The analog composite signals or analog component
Y (luminance) signals are output from this
connector.
The signals are selected using setup menu item
No.671 (V OUT SEL).
9 P /P OUT connectors (BNC)
B R
These are the output connectors for the analog
component P and P
B
: VIDEO MONITOR OUT/TC OUT connector (BNC)
The video monitor signals are output from this
connector.
The time code signal (LTC) is output when
"TCOUT1" or "TCOUT2" has been selected as the
setup menu item No.572 (V-MON/TC OUT) setting.
24
7 2 3 4
REMOTE
TC IN REF IN
V
T
VIDEO
R
MON
1
OUT
75Ω AUTO DC IN
TC
OUT
A
U
D
I
O
M
O
N
O
U
T
:
signals.
R