Panasonic AJ-LT95 Operating Instructions Manual page 19

Parts and their functions
Editing operation area
< A2 (A4) button
A2: Press this button to initiate audio channel 2
insert editing.
Check that its LED has lighted before
proceeding with editing.
A4 ([SHIFT] + [A2]):
To initiate audio channel 4 insert editing, press
the A2 button while holding down the SHIFT
button.
Check that its LED has lighted before
proceeding with editing.
<Note>
The A4 LED will light in the 25 Mbps mode also but
CH4 editing operations cannot be performed.
= TC button
Press this button to initiate time code insert editing.
Check that its LED has lighted before proceeding
with editing.
POWER
OFF ON AUDIO MONITOR SELECT
MIX MIX
4 4
3 3
(V1·2)
CH 1 CH 2 CH 3 CH 4
UNI V1 V2
2 2
V1/V2
MIX 1 MIX 1
ANALOG L R
REC
VAR
< = >
CH 1 CH 2
UNI
CH 3 4
VAR
MIX 4 MIX
3 3
2 2
MIX 1 MIX
ANALOG ANALOG
SDI
INT
CH 1
> EDIT button
When this button is pressed during VTR2 playback,
the E-E mode is established in accordance with the
selected edit mode (ASMBL, A1, A2, A3, A4 or TC)
for as along as the button is held down. (Select E-
E)
When it is pressed together with the PLAY button
during VTR2 playback, editing is initiated in the
selected edit mode (ASMBL, A1, A2, A3, A4 or TC).
(Manual editing)
To exit manual editing, press the ALL STOP button.
19
CH 3 CH 4
V2
PB
SDI
REC
4 MIX 4 MIX 4
3 3
2 2
1 MIX 1 MIX 1
V2
INPUT
ANALOG ANALOG
SDI SDI SDI
INT INT INT
10 10 10
0 0 0
10 10 10
20 20 20
30 30 30
0 0 0 0 0 0
CH 2 CH 3 CH 4
V2 INT REC
/ V1 PB