Table of Contents
Advertisement
Installation and operation manual
2.5.5 Installation
The improper assembly or electrical installation of the product and accessories may result in personal injury
and damage to property and impair operation.
For safe assembly and electrical installation, observe the following:
•
Assemble the product and all the parts, accessories and materials used free of mechanical stress.
•
Check all plug-type connections for a correct fit.
•
Prevent trip hazards by routing hoses appropriately.
•
Fix and fasten hoses in such a way that they cannot flap around.
•
Install the inlet and drain lines for condensate as fixed pipes.
2.5.6 Maintenance
Improperly carrying out maintenance and repair work may result in serious injury or death.
For safe maintenance and repairs, observe the following:
•
Before starting work, depressurise the pressurised product and accessories and secure them against
unintentional pressurisation.
•
Before starting work, cut off the condensate feed to the product and divert the incoming condensate into
a separate container.
•
Only use materials approved for the respective application.
•
Use only suitable tools that are in proper working order.
•
Only use cleaned pipes and hoses that are free of dirt and corrosion.
•
Never use abrasive or aggressive cleaning agents or solvents which could damage the outer coating
(e.g. markings, type plate, corrosion protection, etc.).
•
Never clean the device with hard or pointed implements.
•
Use only the specified materials and media for cleaning.
•
Observe statutory, local and in-house hygiene regulations.
•
Pay attention to order and cleanliness during maintenance and repair work. Prevent contamination from
entering the opened product or accessories. Store disassembled components and accessories directly in a
safe place.
•
After completing maintenance and repair work, remove all tools and cleaning agents used, as well as all
parts that are no longer needed, from the work area.
•
Only dispose of product and accessories when cleaned and freed of any residue.
•
Dispose of all components, parts, operating and auxiliary materials as well as cleaning agents
professionally and in accordance with all locally applicable regulations and standards.
•
Dispose of electrical and electronic components using a specialist disposal company or return them to
manufacturer.
QWIK-PURE
®
11 | 64
Advertisement
Table of Contents
