Beko QWIK-PURE 10 Installation And Operation Manual page 33

Installation and operation manual
Illustration
NOTE
Assembly work
Overflow of the clean water tank.
If there is no gradient towards the wastewater system connection, or if there are
cross-sectional constrictions in the water outlet hose, this can lead to the clean
water tank overflowing.
• The connection to the wastewater system is located below the condensate
drain.
• Route the water outlet hose with a steady slope and without any kinks to the
connection to the wastewater system.
Description / explanation
20. Screw the supplied elbow connector with the
mounted flat gasket clockwise as far as it will go
onto the condensate drain of the QWIK‑PURE
and position it so that the outlet is pointing
downwards.
21. Attach a water outlet hose to the angled elbow
connector on the condensate drain and secure it
against slipping off with a hose clamp.
22. Tighten the hose clamp hand-tight.
23. Route the water outlet hose with a steady slope
and without any kinks to the connection to the
wastewater system.
QWIK-PURE
®
®
33 | 64