Change Oil In Engine Oil Pan, Replace Engine Oil Filter Cartridge - Komatsu PC600-6 Operation And Maintenance Manual

Hydraulic excavator
Table of Contents

Advertisement

MAINTENANCE PROCEDURE

CHANGE OIL IN ENGINE OIL PAN, REPLACE ENGINE OIL FILTER CARTRIDGE

Engine parts and oil are at high temperature immediately after the engine is stopped, and will cause serious burns. Wait for the
temperature to cool down before starting the operation.
Oil pan refill capacity: 37 liters (9.8 US gal)
Filter wrench
1. Remove cover (1) at the bottom of the engine, then set a
container immediately under drain valve (2) to catch the
drained oil.
2. Be careful not to get oil on yourself. Move lever (3) of the drain
valve down slowly to drain the oil, and after draining the oil,
raise the lever to close it.
3. Open the cover of the engine hood, use a filter wrench from the
top of the engine, turn filter cartridge (3) to the left, and remove
it.
4 - 60
WARNING
MAINTENANCE

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pc600lc-6

Table of Contents