User Interface And Remote Controller (Optional Parts) - Fujitsu WSYA050ML3 Design & Technical Manual

1. User interface and remote controller (Optional parts)

1
2
3
4
Ref. Function
Selecting DHW operating mode
(Domestic hot water)
1
: On
: Off
2 Digital display
3 Exit "ESC"
4 Navigation and setting
5 Selecting heating mode
6 Info key
7 Confirm "OK"
8 Selecting cooling mode
RESET button
9 Hold down the "RESET" key for less
than 3 seconds.
12 Presence key
5
2
6
7
4
8
6
9
If the installation is fitted with a DHW tank
• On: Production of DHW according to the time program
• Off: Preparing the domestic hot water for stopping with the
anti-frost function active
• Manual start button: Hold down the DHW key for 3 seconds.
Switch from "reduced" to "comfort" until the next time the
DHW timer switches over.
• Operating control
Readout of the current temperature, the heating mode and
any faults .
• View the settings (Info section)
Quit the menu.
• Selecting the menu
• Setting parameters
• Adjusting the ambient temperature point
• Auto : Heating operation according to the heating program
(Summer/Winter mode switchover is automatic.)
• : Constant comfort temperature
• : Constant reduced temperature
• : Standby mode with anti-frost protection
(Provided that the heat pump's electrical power supply is
not interrupted.)
• Various data
For details, refer to "Various data of information display"
page 03-2.
NOTE: Ensure that the general electrical power supply
has been cut off before starting any repair work.
When the HP is not under tension, protection
frost-free is not assured.
• Reading error codes
For details, refer to "Error codes"
• Information concerning maintenance, special mode
• Input into the selected menu.
• Confirmation of the parameter settings
• Confirmation of the adjustment to the comfort temperature
setting
If the installation is fitted with the cooling kit:
• : Cooling operation according to the heating program
(Summer/Winter mode switchover is automatic.)
Reinitializing the parameters and canceling error messages.
Do not use during normal operation.
Comfort/Reduced switchover
- (03-1) -
1
Auto
0 4 8 1 2 1 6 2 0 2 4
3
ESC OK
Definition
on page 03-3.
1. User interface and remote controller (Optional parts)
5
7
12
8
on