9
Checking the Gearbox
Lubricant
No Parts Required
Procedure
Ensure that the gearbox has the correct amount
of lubricant; refer to
Checking the Lubricant in the
Gearbox (page
23).
10
Checking the Caster Tire
Pressure
No Parts Required
Procedure
Ensure that the caster tires are filled to 2 to 3.5 bar (30
to 50 psi); refer to
Checking the Caster Tire Pressure
(page
27).
11
Greasing the Cutting Unit
No Parts Required
Procedure
Grease the cutting unit before the first operation; refer
to
Lubricating the Cutting Unit (page
properly grease the machine will result in premature
failure of critical parts.
12
Engaging the Turnaround
Mode
No Parts Required
Procedure
Use the traction-unit display screen to engage
Turnaround mode; refer to your traction unit
Operator's Manual.
Important:
Using Turnaround mode with an
equipped flail mower helps prevent premature
driveline wear. You must always have Turnaround
mode engaged when mowing with the flail.
Note:
Turnaround mode allows you to quickly raise
the flail mower above the turf when completing a quick
turn at the end of a mowing pass (or while navigating
around obstacles) without disengaging the PTO.
14
22). Failure to