Table of Contents
Advertisement
WARNING
Failing to maintain proper torque of the wheel
lug nuts could result in personal injury.
Torque the wheel lug nuts to the proper torque
value.
Checking the
Planetary-Gear-Drive Oil
Service Interval: Every 400 hours
Use high quality SAE 85W-140 gear lube as a
replacement.
1.
With machine on level surface, position the
wheel so 1 check plug is at the 12 o'clock
position and the other is at 3 o'clock position
(Figure
15).
Figure 15
1. Check/drain plug (2)
2.
Remove the plug at the 3 o'clock position
15).
Note:
The oil level should be at the bottom of
the check-plug hole.
3.
If the oil level is low, remove the plug at the 12
o'clock position and add oil until it begins to flow
out of the hole at the 3 o'clock position.
4.
Install both plugs.
Checking the Rear-Axle
Lubricant
Service Interval: Every 400 hours
The rear axle is filled with SAE 85W-140 gear lube.
The capacity is 2.4 L (80 fl oz). Visually inspect for
leaks daily.
1.
Position the machine on a level surface.
2.
Remove a check plug from 1 end of the axle and
ensure that the lubricant is up to the bottom of
the hole
Note:
add enough lubricant to bring the level up to the
bottom of the check-plug holes.
g019500
1. Check plug
Checking the
(Figure
Rear-Axle-Gearbox
Lubricant
Service Interval: Every 400 hours
The gearbox is filled with SAE 85W-140 gear lube.
The capacity is 0.5 L (16 fl oz). Visually inspect for
leaks daily.
1.
Position the machine on a level surface.
2.
Remove the check/fill plug from the left side of
the gear box and ensure that lubricant is up to
the bottom of the hole
Note:
bring the level up to the bottom of the hole.
24
(Figure
16).
If the level is low, remove the fill plug and
Figure 16
2. Fill plug
(Figure
If the level is low, add enough lubricant to
g011487
17).
Advertisement
Table of Contents
