Installing The Decal; Only) - Toro 30605TE Operator's Manual

3
Checking the Fluid Levels
No Parts Required
Procedure
1. Check the engine-oil level; refer to
Engine-Oil Level (page
2. Check the hydraulic-fluid level; refer to
the Hydraulic Fluid (page
3. Check the cooling system; refer to
Cooling System (page
4. Check the planetary-gear-drive oil; refer to
Checking the Planetary-Gear-Drive Oil (page
24).
5. Check the rear-axle lubricant; refer to
the Rear-Axle Lubricant (page
6. Check the rear-axle-gearbox lubricant; refer
to Checking the Rear-Axle-Gearbox Lubricant
(page 24).
4
Installing the Decal (CE
Machines Only)
Parts needed for this procedure:
1 Production-year decal
Procedure
On machines requiring CE compliance, install the
production-year decal included in the loose parts and
the CE Kit, sold separately
Checking the
50).
Checking
62).
Checking the
58).
Checking
24).
(Figure 3).
1. Production-year decal
16
Figure 3
g279510