Back to Contents Page
Technical Specifications: Dell™ PowerVault™ 124T LTO-3 Autoloader User's Guide
Physical Specifications
Autoloader Performance Specifications
Autoloader Environmental Specifications
Autoloader Power Specifications
Autoloader Vibration Specifications
Autoloader Shock Specifications
Tape Drive Specifications
Physical Specifications
Characteristic
Product Alone
Height
8.9 cm (3.5 in)
Width
45 cm (17.7 in)
Length
75.46 cm (29.71 in)
Package Weight (without media) 22.7 kg (50 lb)
Footprint
0.32 square meters (3.4 square feet)
Autoloader Performance Specifications
Characteristic
Specification
Maximum data transfer rate
Native: 245 GB/hr
Compressed: 490 GB/hr (assuming 2:1 compression ratio)
Drive type
1 IBM LTO-3 drive
Number of slots
16 (8 per magazine)
MCBF
100,000 cartridge load/unload cycles
Interface
Ultra 160 SCSI LVD
Initialize element status
90 seconds (typical)
Typical cycle time
< 40 seconds. One cycle consists of moving a cartridge from the tape drive to a magazine slot, selecting another magazine
slot, and then moving the cartridge back to the tape drive. It does not include the time that the tape drive takes to unload or
load/calibrate.
Average load time (after placing
LTO Ultrium 3 = 15 seconds (to BOT for previously written tape)
cartridge in drive)
LTO Ultrium 3 = 15 seconds (to BOT with initialized tape)
Average unload time (from BOT) LTO Ultrium 3 = 15 seconds (from BOT)
Autoloader Environmental Specifications
Characteristic
Specification
Temperature Range (Dry Bulb)
Operating
+10° to +35°C
Nonoperating
–40° to +65°C
Temperature Variation
Operating
10°C per hour
Nonoperating
20°C per hour
Humidity
Operating
20% to 80% noncondensing
Nonoperating
10% to 90% noncondensing
Gradient
10% per hour without condensation
Wet Bulb
Operating
26°C maximum
Nonoperating
29°C maximum
Altitude
Operating
–153 to 3048 m
Nonoperating
–153 to 12192 m
Vibration (5- 500 Hz)
Maximum acceleration to operating 0.25g RMS (random)
Frequency range
500 Hz
Get other manuals https://www.bkmanuals.com