Steps
1. Align the slots on the system-board shield with the ports on the computer.
2. Replace the four screws (M3x5) that secure the system-board shield to the display-assembly base.
Next steps
1. Install the
I/O
cover.
2. Install the
back
cover.
3. Install the stand.
4. Follow the procedure in
Memory module
Removing the memory module
Prerequisites
1. Follow the procedure in
2. Remove the stand.
3. Remove the
back
cover.
4. Remove the
I/O
cover.
5. Remove the
system-board
About this task
The following image indicates the location of the memory module and provides a visual representation of the removal procedure.
After working inside your
Before working inside your
shield.
computer.
computer.
Removing and installing components
25