Dell W29C Service Manual page 73

Table 5. System setup options—Boot Configuration menu (continued)
Boot Configuration
Secure Boot Mode
Expert Key Management
Enable Custom Mode
Custom Mode Key Management
Table 6. System setup options—Integrated Devices menu
Integrated Devices
Date/Time
Date
Time
Camera
Enable Camera
Audio
Enable Audio
Enable Microphone
Enable Internal Speaker
USB Configuration
Enable Rear USB Ports
Enable Side USB Ports
Enable USB Boot Support
Table 7. System setup options—Storage menu
Storage
SATA/NVMe Operation
SATA/NVMe Operation
Default: ON
Changes to the Secure Boot operation mode. Allows to switch between
Deployed Mode and Audit Mode.
Default: Deployed Mode
Allows the PK, KEK, db, and dbx security key databases to be modified.
Allows for selection of key database.
Sets the computer date in MM/DD/YYYY format. Changes to the date take
effect immediately.
Sets the computer time in HH/MM/SS 24-hour format. You can switch
between 12-hour and 24-hour clock. Changes to the time take effect
immediately.
Enables or disables the camera.
By default, Enable Camera is selected.
Enables or disables all integrated audio controller.
Default: ON
Enables or disables microphone.
By default, Enable Microphone is selected.
Enables or disables internal speaker.
By default, Enable Internal Speaker is selected.
Enables or disables rear USB ports.
By default, Enable Rear USB Ports is selected.
Enables or disables side USB ports. .
By default, Enable side USB Ports is selected.
Enables or disables USB Boot Support.
Default: ON
Configures operating mode of the integrated storage device controller.
Default: RAID On. Storage device is configured to support RAID functions.
When enabled, all NVMe and SATA devices will be mapped under VMD
controller. Windows RST (Intel Rapid Restore Technology) driver, or Linux
kernel VMD driver must be loaded in order to boot the OS.
System setup 73