Steps
With the positive-side facing up, insert the coin-cell battery into the battery socket on the system board and snap the battery
into place.
Next steps
1. Install the
system-board
2. Install the
I/O
cover.
3. Install the
back
cover.
4. Install the stand.
5. Follow the procedure in
Heat sink
Removing the heat sink
Prerequisites
1. Follow the procedure in
2. Remove the stand.
3. Remove the
back
cover.
4. Remove the
I/O
cover.
5. Remove the
system-board
About this task
The following image indicates the location of the heat sink and provides a visual representation of the removal procedure.
42
Removing and installing components
shield.
After working inside your
Before working inside your
shield.
computer.
computer.