Toro 08120 Operator's Manual

Heater Kit
Workman
Model No. 08120
Safety
Cooling System Safety
•
Swallowing engine coolant can cause poisoning;
keep out of reach from children and pets.
•
Discharge of hot, pressurized coolant or touching
a hot radiator and surrounding parts can cause
severe burns.
– Always allow the engine to cool at least 15
minutes before removing the radiator cap.
Safety and Instructional Decals
Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or missing.
145-2229
1. Fan—off
2. Fan—on full
© 2023—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
® UTX Utility Vehicle
decal145-2229
3. Heat—low
4. Heat—high
Register at www.Toro.com.
– Use a rag when opening the radiator cap, and
open the cap slowly to allow steam to escape.
•
Do not operate the machine without the covers
in place.
•
Keep your fingers, hands and clothing clear of
rotating fan and drive belt.
•
Shut off the engine and remove the key before
performing maintenance.
Original Instructions (EN)
Printed in the USA
All Rights Reserved
Form No. 3465-437 Rev A
Installation Instructions
*3465-437*