Table of Contents
Advertisement
10.
Plug the 5-terminal connector on the kit wire
harness into the back of the airflow switch
(Figure
9).
11.
Route the control cable, water valve, and wire
harness through the dashboard and secure the
control panel assembly onto the dashboard with
4 button-head bolts (5/8 inch) and 4 locknuts
(#10-24); refer to
3 N∙m (30 in-lb).
Figure 9
Figure
10. Torque the bolts to
Figure 10
g430409
g430435
6
Advertisement
Table of Contents
