Table of Contents
Advertisement
7
Installing the Wire Harness
Parts needed for this procedure:
1
Pan-head bolt (#10-24 x 3/8 inch)
Procedure
1.
Install the fuse cover (supplied with kit wire harness) onto the left side of the heater box with the pan-head
bolt (#10-24 x 3/8 inch) as shown in
2.
Route the kit wire harness as shown in
1. To airflow switch (previously installed)
2. Fuse cover—connected to the heater box with a pan-head
bolt (#10-24 x 3/8 inch)
3. To fuse cover
Figure
23.
Figure
23.
Figure 23
4. To machine wire harness
5. To heater box
13
g460700
Advertisement
Table of Contents
