NEC Express5800/320Fa-L User Manual page 327

Source:
Type:
Event ID:
Description: The system abnormality of the Module [Module Number] was
CPU module is disconnected:
→ When an error occurred in the CPU module, the following message will be recorded
to the system event log and the CPU module may be disconnected. CPU module will
be set to duplex mode again, so there will be no effect on the system by this warning.
If reintegration fails, see "CPU module is not integrated" of this chapter.
Source:
Type:
Event ID:
Description: The driver failed the fast re-sync function of the CPU module.
Source:
Type:
Event ID:
Description: The error occurred on the CPU module of Module [Module
Source:
Type:
Event ID:
Description: The error occurred on the CPU module of Module [Module
Source:
Type
Event ID:
Description: Synchronization of the CPU module stopped.
IO module is disconnected:
→ When an error occurred in the component, the following message will be recorded
to the system event log and the IO module may be disconnected. In this case, contact
your sales agent, since device replacement will be required.
Source:
Type:
Event ID:
HasCtrl
Warning
4323
detected.
[Module Number] "#0" or "#1."
HasCtrl
Warning
1202
[Module[Module Number]]
[Module Number] "#0" or "#1"
HasCtrl
Warning
3500
Number]
[Module Number] "#0" or "#1"
HasCtrl
Warning
4000
Number]
[Module Number] "#0" or "#1"
HasCtrl
Warning
4310
HasCtrl
Error
3600
Troubleshooting 7-21