NEC Express5800/320Fa-L User Manual page 336

7-30 Troubleshooting
When the device screen is displayed in remote management function of remote
KVM, change the screen settings to fit within resolution 1024x768 and refresh
rate 75Hz.
Forgot login name/password to use remote management function from Web
browser:
See "BMC Configuration Jumper Setting" in Chapter 4 and change the implement
position of the jumper to change the each setting (including BMC password) back to
the time of shipping.
IMPORTANT:
This operation also clear the BMC setting that is necessary to connect NEC
DianaScope and NEC Express5800/ft series. When you use NEC DianaScope,
save the setting to connect to NEC DianaScope to a floppy disk before
performing the operation. BMC setting can be configured/saved by system
management function of NEC DianaScope Agent or NEC
EXPRESSBUILDER.
Device is accidentally removed by mistake:
When you click the [Safely Remove Hardware] icon in task tray, device names such
as "USB Mass Storage Device" will be displayed. Among these devices except
"USB Floppy Drive", if you accidentally removed the device by mistake, click the
[Safely Remove Hardware] icon again and select "Safely remove AMD PCI to USB
Open Host Controller." Removed devices will be recognized again by doing this.