NEC Express5800/320Fa-L User Manual page 61

General Description 2-29
Power Supply Unit Error LED
This LED illuminates in amber when the corresponding power supply unit located at the rear of the
server has a problem.
Voltage Error LED
This LED illuminates in amber when the voltage of the CPU/IO module is not within an appropriate
range.
Heart Warning LED
This LED illuminates in amber when the temperature in the CPU/IO module is not within an
appropriate range.
HCS 1 Error LED
Only for 320Fa-M and 320Fa-MR models
This LED illuminates in amber when the water cooling kit 1 in the CPU/IO module has a problem.
HCS 2 Error LED
Only for 320Fa-M and 320Fa-MR models
This LED illuminates in amber when the water cooling kit 2 in the CPU/IO module has a problem.
Access LED on the CD-ROM Drive
This LED illuminates when the installed CD-ROM is being accessed.
Hard Disk Drive LED
Each indication of the DISK LED on a hard disk drive bay has a different meaning.
Blinks in green: the hard disk drive is being accessed.
Illuminates in amber: the hard disk drive has failed.
Illuminates in green and amber in turn: the hard disk drive reconfiguration (rebuild) is ongoing. This
does not indicate the hard disk drive has a problem.
When the rebuilding is completed the LED goes off. If the rebuilding fails, the LED illuminates in
amber.
Blinks in amber: the hard disk drive has a mirror volume for which redundancy is not achieved (i.e.
mirrored configuration is in the degenerated mode).
LAN Connector LED
• LINK/ACT LED
The LINK/ACT LED shows the status of a standard network port. It is green if power is