NEC Express5800/320Fa-L User Manual page 398

8-42 System Upgrade
N8803-033 Fibre Channel Board Set
List of slots to install optional PCI boards
"List of option PCI boards and installable slots:" on page 8-36.
Driver installation procedure
TIPS:
To perform this procedure, you have to log on the system as an Administrator or a member of the
Administrators group.
1.
Mount a N8803-033 Fibre Channel board set, and then start the system.
2.
Start Device Manager from [Start] - [Program] - [Administrative Tool] - [Computer
Management], and check if "Emulex LP1050 Fibre Channel Host Adapter" appear under the
[SCSI and RAID Controllers] as many as mounted.
3.
Set the "NEC EXPRESSBUILDER" CD-ROM into the CD-ROM drive and run
\HAS\W2K3\FCUPDATE.BAT.
4.
When the following pop-up window appears, click [Yes].
5.
The driver is updated. When the following pop-up window appears, click [OK]. The system will
reboot automatically.