Mode/Temperature Control Switch - Hitachi ZW140-6 Operator's Manual

Mode/Temperature Control Switch

 Mode Switch (10)
Selects the air vent. The selected air vent is indicated on
LCD (8).
: Front Vent Mode
: Front/Rear Vent Mode
: Front/Rear/Foot Vent Mode
: Foot Vent Mode
: Foot/Defroster Vent Mode
: Defroster Vent Mode
Each time mode switch (10) is pressed, the vent location can
be changed in 6 stages as illustrated below.
AUTO  
Press defroster switch (14) to change defroster
mode.
 AUTO mode
The air vent location is automatically selected.
 Temperature Control Switch (9):
Sets temperature in the cab.
Temperature in the cab can be set from 18.0 to 32.0 °C by
pressing temperature control switch (9). Temperature can
be set by 0.5 °C increments.
The set temperature is displayed on LCD (8).
OPERATOR'S STATION
 
vent
1-91
9 8 10 14
MNDB-01-011