Control Lever Lock Switch - Hitachi ZW140-6 Operator's Manual

Control Lever Lock Switch

d
WARNING:
 Before leaving the operator's seat, be sure to stop
the engine. Then, set control lever lock switch (1) to
the LOCK ( ) position.
 Always check to be sure that the control lever
lock switch is set in the LOCK ( ) position before
transporting the machine or leaving the machine at
the end of the shift.
Refer to page 5-4 for details.
Control lever lock switch (1) is provided to prevent the
machine being unexpectedly operated even if the operator
mistakenly comes in contact with the bucket and/or lift arm
control lever when getting on or off the machine. When
control lever lock switch (1) is placed to UNLOCK ( ) position,
control lever lock indicator (2) goes OFF and the front control
lever becomes operable.
OPERATOR'S STATION
1-70
1
MNDB-01-005
1
LOCK
UNLOCK
MNEC-01-015
2
MPTC-01-019