Table of Contents
Advertisement
3. SETUP
16. The Partition Size Setting window opens.
• The minimum (default) and maximum (MAX) range capacities are displayed. Set the
capacity you want to create and click the OK button. The minimum value of the range
that can be created is the capacity
of the factory default setting (default).
• When you directly type the capacity, select the custom (Custom), type the partition
capacity in GB units (1 GB = 1,073,741,824 bytes), and click the OK button.
In case of selecting the custom (Custom) and clicking the OK button, if the value outside
the allowable range is typed, the following message will be displayed. Click the OK
button and re-type the partition capacity.
< NOTE >
If Only the system and boot partition is selected at the time of restoration to the
factory default settings through a recovery DVD, the Partition Size Setting window
will not be displayed and setup will proceed to the exit dialog in step 18.
3-4
Advertisement
Table of Contents
