Hitachi 65 Instruction Manual page 252

9. TROUBLE SHOOTING
Table 9-3 Event Log Entries Unique to the Equipment (2/3)
Event
No. Source
ID
13 282 HFWRAS_SYS
14 519 HFWRAS_SYS
15 524 HFWRAS_SYS
16 525 HFWRAS_SYS
17 539 HFWRAS_SYS
18 540 HFWRAS_SYS
19 541 HFWRAS_SYS
20 769 HFWRAS_APP
21 771 HFWRAS_APP
22 800 HFWRAS_SYS
Type Description
Information Revolutions of system fan2
returned to normal value.
Error A failure occurred in the
RAS MCU.
Information In the current settings,
memory dump file won't
be saved. %1
Information In the DIMM %1, error
correctings have occurred
with high frequency.
Error The "%1" was finished.
Information In the DIMM %1, detected
the number of single bit
error from the OS boot
is %2 times(difference
between the last time:%3).
Warning DIMM %1 failure might
occur.
Error An error occurred in %1.
errorcode = %2.
Error Because a wrong value is
set up in registry value
"%1", default value %2 is
set up.
%1
Information
Detailed code = %2.
9-24
Action
No handling.
The RAS MCU might be
malfunctioning. Contact your system
administrator or maintenance personnel.
See "8.2.1" and take action, or see
"8.2.2" and change the setting by
manual operation.
The DIMM may be out of order. Contact
your system administrator or
maintenance personnel.
Hardware monitoring of the RAS
software has been terminated. If
restarting the equipment does not
resolve the error, contact the system
administrator or maintenance personnel.
No handling.
The DIMM may be out of order. Contact
your system administrator or
maintenance personnel.
An error was generated by the RAS
software while the software was
running. If restarting the equipment does
not resolve the error, contact the system
administrator or maintenance personnel.
If restarting the equipment does not
resolve the error, contact the system
administrator or maintenance personnel.
A STOP error has occurred. Check the
error and contact your system
administrator or maintenance personnel.