Closing Maintenance Compartment Doors; Closing The Dc Maintenance Compartment Door - Huawei LUNA2000-200KTL-H0 User Manual

LUNA2000-200KTL-H0 Smart Power Control System
User Manual
Figure 5-20 Connecting FE communications cables
(1) White-and-
orange
(5) White-and-blue (6) Green
----End
Follow-up Procedure
To remove the waterproof RJ45 connector from the Smart PCS, first remove the
coupling nut, then press the clip on the RJ45 connector and pull it out.

5.9 Closing Maintenance Compartment Doors

● Before closing a maintenance compartment door, check that the cables are
● If a maintenance compartment door screw becomes lost, obtain a spare screw

5.9.1 Closing the DC Maintenance Compartment Door

Step 1 Adjust the support bar, close the maintenance compartment door, and tighten the
two screws on the door.
Issue 05 (2022-06-30)
(2) Orange
NO TICE
connected correctly and securely, close the terminal block cover, and remove
any dirt or other unnecessary items from the maintenance compartment.
from the accessory bag in the maintenance compartment.
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
(3) White-and-
green
(7) White-and-
brown
(4) Blue
(8) Brown
42