Huawei LUNA2000-200KTL-H0 User Manual page 54

LUNA2000-200KTL-H0 Smart Power Control System
User Manual
No. Category
4 Fault/
Maintenance
indication
●
Figure 7-2 Optimal indicator viewing distance and angle
Issue 05 (2022-06-30)
Indicator Status (Blinking
Fast: On for 0.2s and then Off
for 0.2s; Blinking Slowly: On
for 1s and then Off for 1s)
Steady red
Blinking red fast
Blinking red slowly
Blinking green slowly
Off
If the Smart PCS is installed on the DC LV Panel (or at a height of about 2.4
m from the ground), you are advised to check the status of the Smart PCS by
using the SmartLogger or app. The optimal viewing distance of the indicators
on the Smart PCS is 3 m to 5 m away from the device and the viewing angle
is ≤ 15°.
NO TE
● Local maintenance refers to the operation of inserting a WLAN module into the USB
port of the device. For example, connecting to the SUN2000 app through the WLAN
module.
● If alarms are generated during local maintenance, the fault/maintenance indicator
shows the local maintenance state first. After the WLAN module is removed, the
indicator shows the alarm state.
Copyright © Huawei Technologies Co., Ltd.
7 Powering On the Smart PCS
Description
A major alarm is generated on the
device.
A minor alarm is generated on the
device.
A warning is generated on the
device.
The device is under local
maintenance or shuts down after
receiving a command.
No alarm is generated, and no local
maintenance operations are
performed.
48