Table of Contents
Advertisement
LUNA2000-200KTL-H0 Smart Power Control System
User Manual
No.
Category
63
64
O&M via USB
connection
8.2.4 Setting Power Adjustment Parameters
Procedure
Step 1 On the home screen, tap Power adjustment to go to the parameter setting
screen.
Figure 8-7 Power adjustment parameters (installer)
----End
Parameters
No.
Category
1
Remote control
Issue 05 (2022-06-30)
Parameter
Description
Quit frequency
Specifies the exit frequency of
of
power raising caused by
underfrequency
underfrequency.
rise power (Hz)
O&M via USB
Set the USB O&M port status
connection
to Always On or Always
OFF.
Parameter
Remote power
schedule
Copyright © Huawei Technologies Co., Ltd.
Description
If this parameter is set to
Enable, the device responds to
the scheduling instruction from
the remote port. If this
parameter is set to Disable, the
device does not respond to the
scheduling instruction from the
remote port.
8 Device Commissioning
Remarks
-
Remarks
-
69
Advertisement
Table of Contents
