Electrical Safety - Huawei LUNA2000-200KTL-H0 User Manual

LUNA2000-200KTL-H0 Smart Power Control System
User Manual
●
●
●
●

1.3 Electrical Safety

Grounding
●
●
●
●
General Requirements
Before connecting cables, ensure that the equipment is intact. Otherwise, electric
shocks or fire may occur.
●
●
●
●
Issue 05 (2022-06-30)
Only qualified professionals or trained personnel are allowed to install,
operate, and maintain the equipment.
Only qualified professionals are allowed to remove safety facilities and inspect
the equipment.
Personnel who will operate the equipment, including operators, trained
personnel, and professionals, should possess all relevant local or nationally
required qualifications for special operations (including high-voltage
operations, working at heights, and operation of special equipment).
Only professionals or authorized personnel should replace equipment or
components (including software).
NO TE
● Professionals: personnel who are trained or experienced in equipment operations
and fully understand the potential hazards involved in equipment installation,
operation, and maintenance
● Trained personnel: personnel who are technically trained, have the required
experience, are aware of potential hazards during certain operations, and are able
to take protective measures to minimize any hazards to themselves and others
● Operators: operations personnel who may come in contact with the equipment,
but excluding trained personnel and professionals
For the equipment that needs to be grounded, install the ground cable first
when installing the equipment and remove the ground cable last when
removing the equipment.
Do not damage the ground conductor.
Do not operate the equipment in the absence of a properly installed ground
conductor.
Ensure that the equipment is connected permanently to the protective
ground. Before operating the equipment, check its electrical connection to
ensure that it is reliably grounded.
D ANGER
Ensure that all electrical connections comply with local electrical standards.
Obtain approval from the local electric utility company before connecting the
equipment to the grid.
Ensure that the cables you have prepared meet local regulations.
Use dedicated insulated tools when performing high-voltage operations.
Copyright © Huawei Technologies Co., Ltd.
1 Safety Information
3