Komatsu PC220LC -8 Operation & Maintenance Manual page 132

OPERATION
Travel Levers
Do not rest your foot on the pedal during operations. If the pedal is depressed by mistake, the machine may suddenly move
and cause a serious accident. Be extremely careful when operating the pedal for travel or steering operations. When you are
not using the pedal, do not rest your foot on it.
If the track frame is facing the rear, the direction of travel operations will be reversed when the travel lever is operated. (The
machine will travel forward when operated in reverse, and in reverse when operated forward; the left and right directions will
also be reversed.)
When operating the travel levers, check if the track frame is facing the front or the rear. (If the sprocket is at the rear, the track
frame is facing the front.)
This lever (2) is used to change the direction of travel between
forward and reverse. ( ) shows the pedal operation.
(a) FORWARD: The lever is pushed forward
(The pedal is angled forward)
(b) REVERSE: The lever is pulled back
(The pedal is angled back)
N (Neutral): The machine stops
REMARK
If the lever is shifted to the FORWARD or REVERSE position from
the Neutral position, the alarm sounds to warn that the machine is
starting to move.
WARNING
DETAILED CONTROLS AND GAUGES
3 - 77