Table of Contents
Advertisement
Model 5344S
Operation and Programming
6.
Press the 5344A MANUAL LOCK key.
The LOCKED annunciator should light.
7.
If the FREQ LO annunciator lights, manually raise the frequency of the 8350A until the 5342A
displays 2 GHz ±25 MHz. The 5344S will automatically tune the 8350A to the desired frequency.
8.
If the FREQ HI annunciator lights, manually lower the frequency of the 8350A until the 5342A
displays 2 GHz ±25 MHz. The 5344S will automatically tune the 8350A to the desired frequency.
9.
Notice that when either the FREQ HI or FREQ LO annunciators are on indicating that tuning is
required, the resolution on the counter decreases to 1 KHz. This allows a very fast update of the
counter display making tuning quicker and easier.
NOTE
The 5344S will display error code Err 01 if the frequency of
the sweeper is changing too fast for the 5344S to follow. This
may occur for the following reasons:
a.
The sweeper is sweeping,
b.
or when manually tuning the sweeper, it is being
tuned too quickly.
Figure 3-8. CW in Manual (Continued)
Advertisement
Table of Contents
