Table of Contents
Advertisement
Model 5344S
Operation and Programming
M0-M4
MO or MO
Turns off all markers.
Ml
The 5344A enters and displays MARKER 1 frequency.
M2
The 5344A enters and displays MARKER 2 frequency.
M3
The 5344A enters and displays MARKER 3 frequency.
M4
The 5344A enters and displays MARKER 4 frequency.
Setting any marker frequency to 0 turns OFF only that marker.
VALUE:
The value for MARKERS may be a simple number such as 10, 25.98,1010.25, etc. The value may
also be a simple number plus an exponent, such as 10.79 E+9,10 E-1,26.5 E-2, etc. An exponent
plus a multiplier must fall within the 5344S range, such as 75.92 E-1 GZ = 7.592 GHz.
The MARKER frequency range is 500 MHz to 18 GHz for the 5342A and 500 MHz to 26.5 GHz for
the 5343A. If the 5344S is placed in Subharmonic Locking mode, the limit extends from 10 MHz
to 99.999999999 GHz for both counters.
Only the first 11 digits are significant. Ail others are ignored. Only the first decimal point is
accepted as valid.
Sending any one of the commands without numerical values causes the 5344A to display that
marker frequency. The marker frequency remains unchanged.
3-67
Advertisement
Table of Contents
