Hitachi HF-W6500 60 Manual page 81

4. CHECKING THE HARDWARE STATUS
(3) SNMP trap configuration
1. In the "SNMP Service Properties" window, select the Traps tab.
2. Under Community name, type the name of the community that trap messages are
sent to, and click "Add to list."
3. Under Trap destinations, click Add. The "SNMP Service Configuration"
window is displayed. Enter the host name, IP or IPX address of a destination you
want to send traps to, and click Add.
4. In the "SNMP Service Properties" window, click Apply.
4-28