Table of Contents
Advertisement
7. FEATURES RELATED TO MAINTENANCE AND FAILURE ANALYSIS
7.1.2 Supported causes of the STOP error code
This function is activated when a blue screen appears due to a cause described in Table
7-1. Causes other than those in Table 7-1 are not supported.
Cause
An NMI is generated by the reset
button or reset signal is input to the
external contact RMTRESET.
An NMI is generated due to parity
error at the PCI bus, LPC bus, or
others
Uncorrectable memory error occurs
(*1) This is displayed in the digital LED status display mounted on the equipment.
(*2) This is the event log in Table 7-2.
(*3) The DIMM name (DIMM A1, DIMM A2, DIMM B1, or DIMM B2) is recorded.
(*4) One of the following codes is displayed according to the DIMM where the error occurred:
DIMM A1 or DIMM A2: 0x9218
DIMM B1 or DIMM B2: 0x9217
For information about what actions you should take when a blue screen appears, refer to
the "HF-W6500 Model 60 INSTRUCTION MANUAL (manual number WIN-62-0074)".
Table 7-1 Supported STOP Error Causes
Error code (*1)
0x00000080
0x00000080
0x00000080
7-2
Contents recorded in the description
field of the event log (*2)
A reset signal was input.
The detailed code is 0x9201.
A PCI parity error occurred.
The detailed code is 0x9202.
An error that cannot be corrected
occurred. (*3)
For the detailed code, see footnote
(*4).
Advertisement
Table of Contents
