Table 4-4 Drive Condition And Displayed Information - Hitachi HF-W6500 60 Manual

4. CHECKING THE HARDWARE STATUS
3. Drive condition
Shows the current status of the drives. In the following areas, the drive conditions of
drive bay1, 2 are displayed. If the drive is mounted in an optional drive bay, the drive
condition of drive bay 3 is also displayed.
No. Drive condition
1 Normal
Failure anticipation by
2
SMART
3 Drive usage excess
4
5 Error
6
7 Not mounted
Nos. 4 through 6: These descriptions apply to the B and T models only.
When failure of a drive is anticipated, the drive may experience hardware failure
in near future. We recommend you to back up the data and replace the drive. For
information about how to replace a drive, refer to "HF-W6500 Model 60
INSTRUCTION MANUAL (manual number WIN-62-0074)".
NOTE
From the viewpoint of preventive maintenance for limited life components, we
recommend that you replace a drive if its operating time has exceeded the
expected life value. For details about how to replace a drive, see the "HF-
W6500 Model 60 INSTRUCTION MANUAL (manual number WIN-62-0074)".

Table 4-4 Drive Condition and Displayed Information

The drive is
offline.
The drive
is being
rebuilt.
Unknown
Icon
Healthy.
A failure may be imminent.
Used hours exceeded prescribed value.
OFFLINE.
REBUILD.
Unknown.
Not Connected.
NOTICE
4-10
Information