(3) Drive usage monitoring setting
You can set up the drive usage monitoring setting. By clicking Advanced, you can set
up the advanced settings of this function.
Figure 3-4 Items in the Drive Usage Monitoring Setting
● "Function is available" check box
• Selected: The drive usage monitoring is enabled.
(default factory-shipped setting)
• Cleared: The drive usage monitoring is disabled.
If you change the current setting, click the check box.
If the drive usage monitoring is disabled, you cannot use the notification functions
described in "2.4 Drive Usage Monitoring" such as indicating if the value of the
drive power-on hours exceeds the threshold.
NOTE
In the default factory-shipped setting, this function is enabled. If the type of the
mounted drive is an SSD, it is recommended that you set to disable from the
point of view of the replacement cycle.
3. SETTING UP THE RAS FEATURE
3-7