Table of Contents
Advertisement
1.3
Specifications
(1) Power
(a) Line voltage
(b) Line frequency
(c) Power consumption
(2) Operating environmental conditions
(a) Ambient temperature :
(b) Relative humidity
(c) Atmospheric pressure :
(3) Storage and transportation conditions
(a) Ambient temperature :
(b) Relative humidity
(c) Atmospheric pressure :
NOTE:
The line voltage differs depending on the area.
(4) External dimensions and mass (not including optional units)
(a) CRT system
<1> External dimensions :
<2> Mass
(b) LCD system
<1> External dimensions :
<2> Mass
CAUTION:
:
100 VAC ±10%
120 VAC ±10%
100 VAC to 127 VAC ±10%
220 VAC to 240 VAC ±10%
:
47 Hz to 63 Hz
:
Maximum 600 VA (including external devices)
(100 V, 120 V, and 100 V to 127 V system)
Maximum 580 VA (including external devices)
(220 V to 240 V system)
10°C to 35°C
:
35% to 80% (no condensation)
700 hPa to 1060 hPa
-10°C to 55°C
:
30% to 80% (no condensation)
However, when the LCD monitor unit (option) is
installed, 50% or less when the temperature is
above 40°C, 40% or less when the temperature is
above 50°C
700 hPa to 1060 hPa
420 mm wide × 630 mm deep × 1260 or
1300 mm high
:
Approx. 73 kg
420 mm wide × 630 mm deep × 1302 or
1342 mm high
:
Approx. 67 kg
For some transducers, the specified operating and storage conditions
are stricter than those for the diagnostic ultrasound system. Refer to
the operation manual provided with the transducer and check the
specified environmental conditions for operation and storage.
No. 2B730-973EN*D
1-2
Advertisement
Table of Contents
