Table of Contents
Advertisement
18. Output/Saving of Image Data
18.1 Data Archive to a CD-R
(1) Place a blank CD-R in the CD-R drive.
(2) Press
MENU
(3) Move the cursor to the top of the menu and then move the trackball slightly to the
left or right, depending on the position in which the menu is displayed. A pull-down
menu, which can be used to select other menus, is displayed.
(4) Select the [Other] menu.
(5) Select [Copy to CDR] from the [Other] menu.
The screen below is displayed.
(6) Select the desired data in the "HDD" area and press [>>]. The selected data is
displayed in the "CD-R" area.
(7) When data selection is complete, select [Backup]. The selected data is archived
onto the CD-R.
(8) When data archiving is complete, the message "Record success!" is displayed and
the CD-R is ejected automatically.
(9) Remove the CD-R and push the CD-R tray back into the drive.
NOTE:
The maximum image data volume that can be stored on a CD-R is 600 MB.
. The menu appropriate for the current display mode is displayed.
Copy to CDR
HDD
12345
123
Used:
No. 2B730-973EN*D
18-1
CD-R
0
Free:
600
Total:
600
Backup
Close
Advertisement
Table of Contents
