Table of Contents
Advertisement
6.3
Preparation for Use During an Operation or for Emergency
Cases
WARNING:
6.3.1 Preparation of a backup system
Prepare a backup system when an urgent examination is to be performed, for example
during an operation or for an emergency case.
6.3.2 Power OFF/ON in the case of system failure
When any of the following abnormalities occurs with the system, the system may be
able to recover from the abnormality by pressing the RESET switch.
• An error message is displayed and does not disappear.
• The screen display is abnormal.
• The system operations are disabled.
<System OFF/ON procedure>
Follow the steps below to reset the system.
(1) Press the main switch on the power panel.
(2) Wait at least 30 seconds.
If the main switch is turned ON immediately after being turned OFF, unexpected
system malfunction may occur.
(3) Turn ON the main switch. The system is restarted.
(4) If the system is still abnormal even after power OFF/ON, use the backup system.
Prepare a backup system when an urgent examination is to
be performed, for example during an operation or for an
emergency case. If a severe problem should occur with the
system, the normal operation of the system may not be
recovered by resetting the system and the examination may
not be able to continue.
No. 2B730-973EN*D
6-2
*
Advertisement
Table of Contents
