Table of Contents
Advertisement
8.2
Display and Operation of the Menu
The functions not available on the panel are displayed in the menu. The menu should
be displayed when required.
(1) Press
MENU
Functions that cannot be selected or switched in the menu are displayed in gray.
(a) Movement of the menu display position
The menu can be moved to the left or right by operating the trackball to the left
or right.
(b) Display of other menus
Move the cursor to the top of the menu and then move the trackball slightly to
the left or right, depending on the position in which the menu is displayed. A
pull-down menu, which can be used to select other menus, is displayed.
Select the menu to be displayed and press
(2) Operate the trackball up and down to move the cursor to the desired item.
. The menu appropriate for the current display mode is displayed.
Top of the menu
Focal Ptn
Density
DR
Time Smth
Axial Smth
LateralSmth
Mid Filter
E.Enhance
AGC
PostProcess
Reject
L/R
U/D
Rotation
Scan Rang
High Frame
Needle
No. 2B730-973EN*D
8-2
.
SET
B
B
M
Other
Advertisement
Table of Contents
